A/1.8K-INW-4'-PB - ACI
Automation Field Components
1,800 Ohm Thermistor, Immersion, No Well, 4', Plastic Enclosure
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
124114
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/1.8K-INW-4'-PB - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The plastic box, immersion no well configuration has male 1/2 inch NPT threads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. ACI also standardizes with etched Teflon lead wires and wells must be ordered separately for this part. Please note that the PB enclosure is rated to 203 degrees Fahrenheit. ACI immersion temperature sensors are designed for HVAC, Building Automation Systems, and light industrial applications. Specific applications include: chillers, hot water systems, tanks, and boilers. NOTE: Welded thermowells are not intended for moving water or high pressure service. Fluid velocity and wake frequency are primary factors in well failure. Machined thermowells should be used in these types of applications.
- Negative temperature coefficient
- Double encapsulated sensor
- Easy open / close latch system (no screws)
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/100KS-RA-36'-PB - ACI
Automation Field Components
100,000 Ohm Thermistor, Rigid Probe Averaging, 36', Plastic Enclosure
A/TT100-I-6'-4-GD - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Immersion, Welded Well, 6', Galvanized Enclosure, 4-20mA Output
RN (240-730) - ACI
Automation Field Components
Resistor Network (240 to 730 Ohms)
A/RH3-R-LCD-420 - ACI
Automation Field Components
Relative Humidity, Room, Humidity with LCD, 4-20mA
PXP5.3 - ACI
Automation Field Components
Analog Input (0-5VDC), Pressure Output (0-15PSI), Single Valve, 0.005" Bleed Orifice, (0-10V, 0-15V, 0-20mA Selectable)
A/100-LTS-10' - ACI
Automation Field Components
100 Ohm RTD, 2" Freezer Probe 316SS, 10'
A/20K-S-4X - ACI
Automation Field Components
20,000 Ohm Thermistor, Strap On, NEMA 4X Enclosure
A/10KS-A-24'-PB - ACI
Automation Field Components
10,000 Ohm Thermistor, Copper Averaging, 24', Plastic Enclosure