A/0.1CP-D-8'-GD-NIST - ACI
Otomasyon Saha Ekipmanları
High Accuracy 10,000 Ohm Thermistor (Type II), Duct, 8', Plastic Enclosure, NIST Cert
Bu ürün şu anda stokta bulunmuyor.
Ürünü hemen şimdi satın alabilirsiniz ve 5 hafta içerisinde tarafınıza sevkini gerçekleştirebiliriz.
0
CONFIGNIST107
ACI
ABD
{{CMP.TITLE}}
Bu ürünü Havale/EFT yöntemi ile ödemelerde %2 indirim, Kredi kartı ile ödemelerde 9 aya varan taksit seçeneklerini değerlendirebilirsiniz. |
- Ürün Özellikleri
- Ödeme Seçenekleri
- Yorumlar (0)
-
Data Sheet | Teknik Doküman
A/0.1CP-D-8'-GD-NIST - ACI
Otomasyon Saha Ekipmanları
pdf indirBu ürünün sahip olabileceği farklı bir doküman ihtiyacınız var ise lütfen bizimle iletişime geçiniz.
Bu bölümden sadece ürüne ait teknik verileri içeren Teknik Dokümanı (Datasheet) indirebilirsiniz.
The ACI High Accuracy Thermistor Duct Series features a 1/4" diameter stainless steel probe with two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensors as well as increased thermal response times from our high quality, thermally conductive epoxy. The duct style sensor is a single point sensor designed to be used in smaller duct applications and includes an insulation pad for properly sealing your duct and to dampen vibration. For best results, the sensor length should be determined by the actual width or diameter of your duct such that the tip of the probe is in the approximate center. Our standard enclosure options are the galvanized single gang junction box “-GD” or plastic duct enclosure with hinged cover “-PB”. On larger ducts, you may want to refer to our Rigid or Bendable Copper Averaging sensor for increased sensing points and better temperature control. This series can be ordered with optional NEMA/IP rated weather proof enclosures and NIST Certificates as referenced in the ordering grid on the back of the product data sheet. Applications: Data Centers, Labs, Hospitals, Clean Rooms, Roof Top Units, Air Handlers, Monitoring Supply/Discharge/Return/Mixed Air
Garanti Bilgisi :Bu ürün fatura tarihi itibari ile imalat ve malzeme hatalarına karşı 2 yıl süresince garanti kapsamındadır. Ürünler için fatura garanti belgesi yerine geçer, ayrı bir belge düzenlenmemektedir.Teslimat Bilgisi :Bilgiler kısmında ürünlerin stok adetleri paylaşılmaktadır. Stokta bulunan ürünler aynı gün sevk edilir. Stokta olmayan ürünler belirtilen süre zarfında temin edilir.
A/100KS-I-2.5'-PB - ACI
Otomasyon Saha Ekipmanları
100,000 Ohm Thermistor, Immersion, Welded Well, 2.5', Plastic Enclosure
A/10KS-RS-RJ6-A26-C5 - ACI
Otomasyon Saha Ekipmanları
10,000 Ohm Thermistor (Type II), Room (R), Setpoint, Override, 866 to 1266 Ohms, RJ6, Cool/Warm Sticker
VOC-R - ACI
Otomasyon Saha Ekipmanları
VOC, Room Mount, 0-1000 ppb,4-20 mA and 0-10 VDC, Modbus RS-485
A/RH3-CP-RSO-A08-C5 - ACI
Otomasyon Saha Ekipmanları
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 3% Accuracy, 10,000 Ohm Thermistor (Type II), Setpoint:0-10K, w/ Override
PS48HD-C-D-N - ACI
Otomasyon Saha Ekipmanları
Powerscout 48 (48 Channels), Ethernet & Serial, Enclosure, Display
A/AN-BC-FA-12'-GD - ACI
Otomasyon Saha Ekipmanları
10,000 Ohm Thermistor w/11K Shunt, Flexible Cable Averaging, 12', Galvanized Enclosure
A/SCTV2-250 - ACI
Otomasyon Saha Ekipmanları
Analog Current Sensor, 0-10 VDC, DIN Rail, Split Core, 0-100, 0-200, 0-250 Amp (Default)
A/RH5-TT100-R2-1 - ACI
Otomasyon Saha Ekipmanları
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 5% Accuracy, Transmitter w/ 100 Ohm RTD, 1-5VDC (Temp)