LCD, RH3%, SET, DEG F

100 Ohm (Three Wire) RTD, Pipe Mount, 10' Plenum Cable

1,000 Ohm Nickel RTD, Setpoint, w/ Override, LCD, RJ6

Resistor Network (1050 to 1115 Ohms)

Transmitter w/ 1,000 Ohm RTD, Room (R), Setpoint 5K, 4-20mA Output, RES

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 2% Accuracy, 10K Ohm Thermistor, w/ Setpoint 866-1266, & Override, Blue/Red sticker

Transmitter w/ 100 Ohm RTD, Room (R) w/ Setpoint: 10K and Override, 4-20mA Output, LCD, RES

Resistor Network (8.25K to 17.4K Ohms)

0-10VDC Output, Setpoint, w/ Override, LCD

Relative Humidity, RH Outputs: 0-10 VDC, Wall Plate 304SS, ± 2% Accuracy, 20,000 Ohm Thermistor, 0-10VDC

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 2% Accuracy, 20,000 Ohm Thermistor, NEMA 4X Enclosure

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 1% Accuracy, 1,000 Ohm Nickel RTD

LCD, RH2%, SET, DEG F

Transmitter w/ 1,000 Ohm RTD, Room (R) with Override, 4-20mA Output, LCD

LCD, RH2%, SET, O/R, RJ6,DEG F

Transmitter w/ 1,000 Ohm RTD, Copper Averaging, 80', Plastic Enclosure, 4-20mA Output

1,000 Ohm Nickel RTD, Copper Averaging, 12', NEMA 4X Enclosure

4-20mA Output, Setpoint, LCD

10,000 Ohm (CSI) Thermistor, Outside Air, NEMA 3R Enclosure

Wet Differential Pressure, 0-3, 0-7.5, 0-15, 0-30 PSID (Default), 20' Cables, LCD, Outputs: 0-10 VDC (Default), 0-5 VDC, 4-20mA (Selectable)