Differential Low Pressure. 1 inWC, Unidirectional, LCD, 0.50% Accuracy, No Pitot Tube, 4-20mA Output, No Nist, Standard

10,000 Ohm Thermistor (Type III), Room (R), Setpoint 0 to 10K Ohms, 60-90 Sticker

20,000 Ohm Thermistor, Room (R), LCD, C, Blank logo

Relative Humidity, RH Outputs: 0-10VDC, Wall Plate 304SS, ± 5% Accuracy, 10,000 Ohm Thermistor (Type III) w/11K Shunt, 0-10VDC Output

Carbon Dioxide Sensor, Room, 0-2000 PPM, (0-5V, 0-10V, 4-20mA), Temp (10K Type II), Setpoint (0-5K), 60-90 Sticker, Override

10,000 Ohm Thermistor (Type II), Room (R2), Setpoint, Override, 0 to 100K Ohms, 18-28 C Sticker

3,000 Ohm Thermsitor (Type III), Room (R), w/ Override, LCD

10,000 Ohm Thermistor (Type III), Room (R), Setpoint 0 to 10K Ohms, Override, 18-28 Deg C Sticker

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 2% Accuracy, 20,000 Ohm Thermistor, NEMA 4X Enclosure, NIST

Differential Low Pressure, 2 inWC, Unidirectional, No Display, 0.25% Accuracy, No Pitot Tube, 0-10VDC Output, 5 Point Nist, Standard

Differential Low Pressure, 10 inWC, Unidirectional, LCD, 0.25% Accuracy, w/ Pitot Tube, 0-10VDC Output, 5 point Nist, Standard

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 2% Accuracy, 1,000 Ohm RTD (Two Wires)

Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R), ± 2% Accuracy, 100,000 Ohm Thermistor, w/ Override

10,000 Ohm Thermistor (Type III), Room (R), Setpoint, Override, Comm Jack (6 Pin/6 Conductor), 0 to 5K Ohms, Cool/Warm Sticker

100 Ohm (Three Wire) RTD, Pipe Mount, 20' Plenum Cable

1,800 Ohm Thermistor, Setpoint, w/ Override, LCD, Deg C

Differential Low Pressure, 25 inWC, Unidirectional, No Display, 0.25% Accuracy, No Pitot Tube, 0-10VDC Output, No Nist, Standard

3,000 Ohm Thermistor, Immersion, No Well, 8", Plastic Enclosure

10,000 Ohm Thermistor (Type II), Room (R2), w/ Setpoint 0 to 20K, Override, RS232, Blue/Red Sticker

1,000 Ohm Nickel RTD, Flexible Cable Averaging, 50', Plastic Enclosure