AFP VERSION #8 - ACI
Automation Field Components
Analog Input (0-5VDC), Floating Point Output (46 sec), Version #6, (240, 600s Selectable)
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
144604
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
AFP VERSION #8 - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The AFP allows an analog signal to control a floating point actuator. It converts an analog signal into two relay contact outputs (one increase/one decrease). The isolated floating point output can be controlled by any one of eight analog input signal ranges (using offset jumper). On a loss of power, the AFP's output relays will be open, and no signal will be generated. The actuator will remain at the last commanded position unless it is "spring return". The AFP output rate of change (46s, 240s, 600s) is DIP switch selectable. In VERSION #8, upon power-up, the decrease relay will drive 105% of the chosen timing range to ensure that the output is at its minimum position.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TT100-INW-4'-2-4X - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Immersion, No Well, 4', NEMA 4X Enclosure, 2-10VDC Output
A/TTM100-INW-2.5'-4-BB - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD (NIST Cert), Immersion, No Well, 2.5', NEMA 3R Enclosure, 4-20mA Output
A/100-3W-I-6'-PB - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Immersion, Welded Well, 6', Plastic Enclosure
A/CP-RS-A10-C5 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R), Setpoint, 0 to 1K Ohms, Cool/Warm Sticker
A/RH1-100-3W-D-NIST - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Duct, ± 1% Accuracy, 100 Ohm RTD, Euro Enclosure, NIST Cert (Temp)
AFP VERSION #7 - ACI
Automation Field Components
Analog Input (0-5VDC), Floating Point Output (30 sec), Version #6, (60, 90s Selectable), Drives actuator up 105% of range
A/RH3-1.8K-R2 - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy, 1,800 Ohm Thermistor
STN-10.0' - ACI
Automation Field Components
Sampling Tube for SL-2000, 10.0'