AAR - ACI
Automation Field Components
Analog input, Relay Output, 2 (SPDT) Relays
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
101785
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
AAR - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The AAR is controlled by a single analog input signal with two potentiometers controlling each output relay. The two 10 amp output relays can be independently set to fixed or adjustable deadband. “Fixed”, the relay will turn “ON” at the level set by the Low pot and will turn “OFF” at a fixed 3% of the input signal below the turn-on level. “Adjustable” allows a flexible range of deadband adjustment using the High and Low potentiometer. The edge-connector feature allows signal and power connections to be extended to the next board. This allows the installer to wire the first unit then slide additional units together by plugging into a power and signal bus without the need to strip and terminate additional wires. The AAR is covered by ACI's Two (2) Year Limited Warranty.
- Digital output expansion
- Level indication
- Alarms
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/50K-PO-18' - ACI
Automation Field Components
50,000 Ohm Thermistor, Probe Only, 18'
A/10K-E1-INW-6'-GD - ACI
Automation Field Components
10,000 Ohm (E1) Thermistor, Immersion, No Well, 6', Galvanized Enclosure
A/CP-R-232 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Room (R), Comm Stereo Jack (3.5mm)
TUCH2-ANF1XXXXXX-305XXXXXX - ACI
Automation Field Components
LCD, RH3%, DEG F
A/1K-LTS-30'-NIST - ACI
Automation Field Components
1,000 Ohm RTD, 2" Freezer Probe 316SS, 30', NIST Cert
85930-018-002 - ACI
Automation Field Components
Smart Sensor Replacement, Hydrogen Sulphide, 0-25 ppm
A/TT100-LT-O-4 - ACI
Automation Field Components
Transmitter w/ 100 Ohm RTD, Low Temperature Outside Air, 4-20mA Output
A/RH3-CP-R2O - ACI
Automation Field Components
Relative Humidity, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), Room (R2), ± 3% Accuracy, 10K Ohm Thermistor (Type II), w/ Override