A/100KS-D-4'-PB-NIST - ACI
Automation Field Components
100,000 Ohm Thermistor, Duct, 4', Plastic Enclosure, NIST Cert
This item is temporarily out of stock.
It can be backordered right now, and we can ship it within 5 weeks.
0
146152
ACI
U.S.A.
{{CMP.TITLE}}
- Features
- Comments (0)
-
Data Sheet
A/100KS-D-4'-PB-NIST - ACI
Automation Field Components
download pdfPlease contact us if you need any other document this item may have.
You can only download Technical Document (Datasheet) on this section.
The ACI Thermistor Duct Series features a stainless steel probe with two, 22 AWG Etched Teon colored lead wires to dierentiate the dierent sensor types. The sensors in this series are manufactured using ACI’s proved double encapsulation process to eliminate the eects of moisture on the sensors and increased response times from our high quality, thermally conductive epoxy. The duct sensor is designed to be used in smaller duct applications and includes an insulation pad for sealing your duct and dampening vibration. The sensor length should be determined by the width or diameter of your duct such that the tip of the probe reaches the approximate center of the duct. Our standard enclosure options are the galvanized enclosure “-GD” or plastic duct enclosure with hinged cover “-PB”. On larger ducts, you may want to refer to our Rigid or Bendable Copper Averaging sensor for increased sensing points and better temperature control. This series can be ordered with optional NEMA/IP rated weather proof enclosures and NIST certicates as referenced on the back of the product data sheet.
Warranty :This product is under warranty for 2 years against manufacturing and material defects from the date of invoice. The invoice for the products also stands in place of the warranty certificate, a separate document is not issued.Delivery Information :ACI branded products are imported from United States of America factory specially to order. The estimated delivery time of the products is 5 weeks. In this product group, an additional shipping and customs fee of 450EUR is charged for orders under 4,000EUR.
A/TTM1K-INW-2.5'-2-4X - ACI
Automation Field Components
Transmitter w/ 1,000 Ohm RTD (NIST Cert), Immersion, No Well, 2.5', NEMA 4X Enclosure, 2-10 VDC Output
A/AN-DO-12'-10'CL2P - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Duct, Without Box, 12', 10' Plenum Cable
A/CP-DO-4'-96'CL2P-QC - ACI
Automation Field Components
10,000 Ohm Thermistor (Type II), Quick Connects, 4' Probe, 96' Plenum Cable QC
A/100-3W-PO-4' - ACI
Automation Field Components
100 Ohm (Three Wires) RTD, Probe Only, 4'
A/1K-2W-R2-NIST - ACI
Automation Field Components
1,000 Ohm (Two Wires) RTD, Room (R2), NIST Cert
A/AN-RSO-A02-A1 - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Room (R), Setpoint 0 to 20K Ohms, Override, - to + Sticker
AFP VERSION #5 - ACI
Automation Field Components
Analog Input (0-5VDC), Floating Point Output (90 sec), Version #5, (135, 180s Selectable), Relay stays on with 5% of Max/Min
A/AN-A-12'-4X - ACI
Automation Field Components
10,000 Ohm Thermistor (Type III), Copper Averaging, 12', NEMA 4X Enclosure